The platform

One screen.
The whole field.

Torque, current, frequency and alarms for every well, live. Early sanding detection, safe remote setpoints, a full audit trail.

ARGUS · FIELD OVERVIEW · LIVE SIMULATION

FIELD / ALL PADS

SIM · 750 MS

Running · stopped · offline

6 · 1 · 0

7 wells, all reporting

Field power

68.4 kW

sum of 6 running drives

Active alarms

1 warning

W-103 · torque rising

24 h · well-hours · kWh

142 h · 1,284 kWh

of 168 possible well-hours

Torque (%)

Well status

W-101RUN46.5 Hz22.4 A

W-102RUN48.0 Hz30.8 A

W-103WARN46.5 Hz31.6 A

W-104PUMP-OFF— Hz—

W-105RUN41.0 Hz19.2 A

W-106RUN50.0 Hz27.5 A

W-107RUN44.5 Hz24.9 A

Event log

TORQUE_RISE · W-103 · Pad B03:12

Torque creeping up: 12 → 23 % over 2 h, current flat. Likely sand loading.

SETPOINT · W-102 · Pad A02:44

46.5 → 48.0 Hz · by operator · confirmed, logged.

CLEAN RUN · W-101 · Pad A01:58

12 days. No faults, no trips, no drive-outs.

ALARM CLEARED · W-104 · Pad A00:25

POWER_LOSS resolved. Site power back on line.

Capabilities

Everything the field needs.
Nothing it doesn't.

Everything below runs on producing wells today unless it is marked On the roadmap or Enabled per site. We would rather you knew before you bought than after.

01 Live telemetry Frequency, current, power, torque and drive temperature pushed every ~2 s over a live socket, refreshed as the gateway acquires them.

02 Safe remote controlEnabled per site Start, stop and set speed with confirmation, roles and a site-wide safe lock. Built and audited; switched on per site when the operator decides.

03 Alarms to your phone Drive fault, overcurrent, pump-off, power loss and torque creep. The second it happens, it is on your phone. Not at the 9 a.m. round.

04 Pump-off & sanding detection Pump-off (sustained underload) alarm and torque-creep sanding signatures from drive data alone, no downhole sensor.

05 Level & pressure sensorsOn the roadmap Downhole hydrostatic level and wellhead pressure transmitters on the same kit; first units going in now.

06 Field log & reports One-tap crew logging that survives Starlink blips, plus production and shift reports to PDF/Excel.

07 Energy & runtime analytics Daily kWh and cost per well, runtime vs downtime, and a compare view that overlays every well.

08 Multi-pad, multi-well Wells group by pad with running/kW rollups. Add a pad with nothing but its own field unit — no server, no new network.

09 Works on any phone Installs like an app, tolerates a flaky link, and keeps the operator in control from the wellsite or office.

The hardware

One cabinet per pad.
Pre-wired. Pre-configured.

NEMA 3R weatherproof enclosure: gateway, uplink and power inside, alarms and telemetry out. Pre-configured for your drives before it ships. Mount it, connect the drive, power it up.

How it works

From drive to phone
in four steps.

01 Read the drive A compact field unit reads your pump drive and turns it into clean, secure telemetry. In the kit.

02 Bridge to the cloud The pad connects to Argus over Starlink and a private encrypted mesh. No static IP, no on-site PC. Runs on Starlink / CGNAT.

03 Argus ingests & guards The cloud stores telemetry, runs the alarm engine and the command-safety pipeline, and self-heals the link. Hosted, zero maintenance.

04 You open a browser Live data, remote control, alarms and reports, on a laptop or the phone app, from anywhere. Secure, role-based login.

Control, done safely

Every remote command
has to get past this.

Argus is a monitoring and control aid. It does not replace your protective devices, site procedures or supervision — it adds limits, confirmation and a record on top of them.

01 Local-first control The pad keeps running on its own setpoints if the cloud or the link goes dark.

02 Confirm every command Start, stop and setpoint changes each take a deliberate, explicit confirmation.

03 Named users & roles Who can do what is set per person. View-only by default, control granted on purpose.

04 Full audit trail Every change is logged: who, what and when, in a record you can't quietly edit.

05 Encrypted & token-authed Traffic is encrypted in transit and every session is token-authenticated; nothing on your pad opens an inbound port.

06 Site-wide safe lock Freeze all control across the whole field with a single tap.

Full security overview →

Put your field online.

First well live in days, not quarters.

One screen.The whole field.

Everything the field needs.Nothing it doesn't.

One cabinet per pad.Pre-wired. Pre-configured.

From drive to phonein four steps.